We-Vibe is a Canadian company that produces vibrators and other sexual wellness products. The company was founded in 2003 by two engineers, Bruce Murison and Donna Dodson. We-Vibe also offers a line of lubricants and a line of sexual wellness products for men.
- 1 How To Charge We-Vibe?
- 2 How To Know if We-Vibe Charging Is Complete?
- 3 How To Open Charger Case For We-Vibe?
- 4 How to Check How Much Battery Power Has Left in Your Vibe?
- 5 FAQ
- 6 Conclusion
How To Charge We-Vibe?
Follow the instructions to properly charge the We-Vibe:
- To charge the We-Vibe Sync, first locate the charging port on the bottom of the toy.
- Next, insert the provided USB charging cable into the charging port.
- Once the cable is inserted, the We-Vibe Sync will begin charging. A full charge will take approximately 2 hours.
To charge the We-Vibe TOUCH, simply plug the USB charging cable into the vibrator and into a USB port. The vibrator will take approximately 2 hours to fully charge. The We-Vibe TOUCH will run for up to 2 hours on a full charge.
We-Vibe 4 Plus
To charge the We-Vibe 4 Plus, first make sure that it is turned off. Then, connect the USB cable to the charging port on the side of the vibrator. The other end of the USB cable can be connected to a computer or a USB wall charger (not included). A full charge will take approximately 2 hours.
How To Know if We-Vibe Charging Is Complete?
Follow the steps below to find out the charging status:
- To check the battery level, press and hold the power button for 3 seconds. The LED We-Vibe charging light will indicate the current battery level (1 light = 25%, 2 lights = 50%, 3 lights = 75%, 4 lights = 100%).
- When not in use, the We-Vibe Sync should be stored in the provided storage case.
Once the We-Vibe TOUCH is plugged in, a white light will blink on the control panel. This light will turn solid once the vibrator is fully charged. The We-Vibe TOUCH can be used while it is charging, but it will have reduced power. We-Vibe recommends that you unplug the vibrator when it is not in use.
Once the We-Vibe 4 Plus is fully charged, the LED light on the vibrator will turn off. To preserve the battery life, it is recommended to disconnect the USB cable from the vibrator when it is not in use.
How To Open Charger Case For We-Vibe?
To open the charger, you need to do the following:
To recharge the We-Vibe Sync, first open the charger by pressing the button in the middle of the charger. The charger will light up and start to charge the We-Vibe Sync.
To open the charger for the We-Vibe TOUCH, you will need to remove the two screws on the back of the device. Once the screws are removed, you can remove the back of the charger.
We-Vibe 4 Plus
If you have the We-Vibe 4 Plus, there is a little catch that needs to be opened in order to charge it. The catch is located on one of the sides of the charger, just above where the power cord plugs in. To open the catch, you will need to use a small object like a fingernail to pry it open. Once the catch is open, the charger can be easily pulled out.
How to Check How Much Battery Power Has Left in Your Vibe?
To do this, follow the simple steps:
There are a few ways to check how much charge is left in the We-Vibe Sync battery. The most direct way is to use the We-Vibe Sync’s built-in battery indicator. The indicator will show a percentage of battery life remaining, with a green light indicating that the battery is full and a red light indicating that the battery is low.
You can also use the We-Vibe Sync app to check the battery life. The app will show a battery level, as well as a percentage of battery life remaining.
If you want to know how much battery life is left without using the app or the indicator, you can use the We-Vibe Sync’s charging indicator. This indicator will show you how much battery life is left when the We-Vibe charging. The indicator will turn green when the We-Vibe Sync is charging and will turn red when the We-Vibe Sync is charging and the battery is full.
There are a few ways to check how much charge is left in the We-Vibe TOUCH battery.
One way is to plug the We-Vibe TOUCH into an outlet and see if the light turns off. If the light turns off, then the battery is almost out of charge.
Another way to check how much charge is left in the We-Vibe TOUCH battery is to hold down the power button for 3 seconds to turn it off, then unplug it from the outlet and wait until the light turns green to know that the battery is charging.
If you are using the We-Vibe TOUCH with the app, you can also check the battery level by going to the Settings menu and selecting the Battery Level option.
Here’s how to check:
- Connect the We-Vibe 4 Plus to its charger.
- Look for the LED light on the charger. If it’s green, that means the We-Vibe 4 Plus is fully charged. If it’s red, that means the battery is low, and you’ll need to charge it soon.
How long does the We-Vibe take to charge?
The We-Vibe takes about 2.5 hours to charge, which should deliver up to 2 hours of playtime.
How long does the We-Vibe chorus battery last?
The We-Vibe Chorus has a small internal battery that will last for three hours.
Why won’t my We-Vibe tango charge?
First, make sure your We-Vibe tango is on and the light is green, then check the charging cable (make sure your charging cable is fully plugged in and securely connected to your vibe and charger). If you’re still having trouble, try charging the We-Vibe tango with a different USB cable.
- How to Use Vibrator on Penis?
- What Is a Love Egg?
- How to Use Vibrator During Sex?
- How to Use Plusone Mini Massager?
Overall, We-Vibe is a rechargeable vibrator that can be used for solo play or with a partner. It is made of body-safe silicone and has 10 different vibration modes. We-Vibe is waterproof and can be used in the shower or bath.